Qingdao Eaststar Plastic Machinery Co.Ltd.
public_banner

Product introduction

GK-600 / 800 / 1000 series fully automatic root control container making machine

Ⅰ、 Equipment Introduction:

1. The equipment is mainly designed and made in accordance with the working principle of thermal pressure equipment, the process is: sheet —— feeding —— pressing —— pressure protection —— forming —— cutting etc, machine appearance clean and practical , plate processing all adopt center processing, to ensure the precision of all hole size, column and small appearance are hard chrome quenching treatment, ensure sliding and wear resistance, machine system editing adopt manual and automatic two methods, all actions can be a single operation.

2: The feed motor is driven by a servo motor with a power of 2 kW.

3: Feed discharging reducer motor 0.37KW shall cooperate with 1:10 special reducer to ensure the stability of discharging speed!

4: Ceramic heating block: the new ceramic heating block, heating up fast and low power consumption, the temperature can be freely adjusted according to the thickness of different materials.

5: Other mechanical parts are produced and processed by our company. Automatic control system adopts: PLC control,

6: The machine adopts the hydraulic equilibrium distribution design, and the overall balance is better,  and extends the use time of the mold.


IIIntroduction of the equipment subject:

1

Forming (cutting) maximum length range

0.5 m-infinite length (whole mold multiple cut)

2

Forming (cut) width range

600-800mm,  width can adjustable

3

Suitable for sheet thickness

0.15-0.90mm

4

Maximum height of forming

50mm

5

production efficiency

Equipment timing is 3-8 seconds / mode, specific according to the forming effect

6

Product model and mold form

Equipment is applicable to various waveform molds

7

Demolding method

Two-way separation of mold

8

Heating method

Each section is separately temperature-controlled and heated on a single side

9

Total heating power

22 kW

10

Temperature control adjust system

Use a solid-state heating temperature controller to ensure a constant temperature

11

Main motor power

 7.5KW

12

Cooling system form and power

The aluminum alloy beam is equipped with a water trough to ensure the cooling effect of the beam

13

Rated maximum power of the whole machine

32KW

14

Actual energy consumption for normal production

22KW

15

Power supply, voltage

380V 50HZ (three-phase and four-wire)

16

Power of air pressure system

0.4-0.8MPA

17

Overall size of the whole machine

5M long, 1.5M wide and 1.8 m high

Length5000mm*width1500mm*Height1800mm

18

Total weight of the whole machine

4000KG around

 

Ⅴ、Application value of root controller

1. Convenient transportation

2. Thick and durable PVC

3. Improve survival rate

4. Air trim

5. Drain water and breathe

6. Long-distance transportation






FAQ

  • image

  • image

  • image

  • image

Inquiry now

If you have any questions,feedback or comments,please fill out the form below and we will reply you back as soon as possible.

***

13791907665@139.com

***

+86 18706421393